| Picture |
Heading |
Updated |
 |
3A Molecular Sieve for Insulating Glass
Application (1) Removal of CO2 and moisture from air (air pre-purification) and other gases. (2) Separation of enriched oxygen from air. (3) Removal of mercaptans and hydrogen sulphide from natural gas. (4) Removal of mercaptans and hydrogen sulphide from |
2017-10-03 |
 |
Aluminum Spacer Bar For Glazing Glass
Aluminum Spacer Bar for Glazing Glass: The delicate out-looking and cheap price of the HF aluminum spacer is the perfect substitute for cold drawing spacer.Standard and bendable aluminum spacer bar the sizes available:5.5mm to 26.5mm,wall thickness:0.20mm |
2017-09-20 |
 |
Hot-melt Butyl
Specifications solvent-free, fog-free,un-sulfurized,good adhesion to glass,aluminum alloy.zinc plating steel,stainless steel and etc hot melt butyl rubber china Single component sealant without flux, takes butane rubber and polyisobutylene as its basic ma |
2017-09-09 |
 |
Longitudinal Slitting Line
The Slitting Line is used to cut the Aluminum coil into smaller Aluminum tape with certain width and roll it all up. The whole unit adopts electromagnetism to control the speed; the cutting speed, the adjustment, and the assembly line will be all operated |
2017-08-19 |
 |
Aluminum Spacer Bar Equipment
Aluminum Spacer Bar Equipment: The aluminum spacer manufacturing equipment is the machine that processes the aluminum tape by roll-forming and high-frequency induction welding.With the advanced technique,the whole process has no use of water or oil. Produ |
2017-08-10 |
 |
Aluminum Spacer Bar For Double Glass
Aluminum Spacer Bar for Double Glass: Double row perforated to keep the molecular sieve and guarantee moisture absorption.100%hole penetration rate.pure aluminum,no corrosion,no oxidation,no deformation. |
2017-08-05 |
 |
Aluminum Spacer Bar Production Line
The production line for Aluminum Spacer is the equipment that process the Aluminum Ingot by roll-forming and high-frequency induction welding. |
2017-08-02 |
 |
Plastic Corner Key
Plastic Corner Key The key to connect standard Aluminum spacer. Standard Aluminum Spacer will be cut into short length. Four separated parts will be connected by the plastic corner key. Also we could offer the corner key according to customer requirements |
2017-07-31 |
Friends links